BLOG

/BLOG

How to add new administrators and admin privileges on Clearpass?

Adding a new administrator on Clearpass is rather simple. Check out the video below for instructions on how to add new admin users and also create a custom admin privilege if necessary.   https://youtu.be/WCHAsJG6nWA

By | July 27th, 2020|Aruba, BLOG, ClearPass, ClearPass|0 Comments

Generating SD-WAN Health Check Event Log Using FortiGate

  The below video showcase how to generate an SD-WAN health check event log using FortiGate Device.   https://youtu.be/xfeuCDPqAcA   By default, there are no events generated when a health check is done in the FortiGate firewall. When we set latency as 10ms (parameter) in the performance SLA threshold of SD-WAN, there is no event [...]

By | July 7th, 2020|BLOG, Fortigate|0 Comments

SD-WAN Configuration Through FortiManager

  SD-WAN provides business application steering, cost savings, and performance for Software-as-a-Service (SaaS) applications, as well as unified communication services. Unlike old WAN technology, SD-WAN is fully managed by centralized software applications creating virtual networks. Cost Savings is the primary factor. Main Functionality is load balancing: if one of the WAN links goes down the [...]

By | July 7th, 2020|BLOG, Fortigate|0 Comments

VPN Configuration Through “VPN Community” in FortiManager

VPN is a connection between two endpoints - a VPN router, for instance – in different networks that allows private data to be sent securely over a shared or public network, such as the Internet. This establishes a private network that can send data securely between these two locations or networks through a tunnel. Using the VPN [...]

By | July 7th, 2020|BLOG, Fortigate|0 Comments

The Pioneer of Wireless surveys-Ekahau

Introduction: This document covers significance of survey and values measured during the survey, issues with traditional survey tools, and other impacts, what it takes to plan a good design for the wireless network and most importantly why is Ekahau the pioneer in this.   What is achieved from the Survey? An active survey helps us [...]

By | May 11th, 2020|BLOG|0 Comments

Adding Multiple Fortigate Devices to Fortimanager

  In FortiManager the admin can monitor and configure multiple FortiGate units in one console. In  Device Manager, you can view, configure, and make changes into the FortiGate devices without having to log in and out of multiple FortiGate units. The below video showcases the step to integrate multiple FortiGate devices into Fortimanager.   https://www.youtube.com/watch?v=nyAkVGQeeQU [...]

By | May 11th, 2020|BLOG, Case studies/WP, Fortigate|0 Comments

Wireless Survey

Introduction: The document covers the purpose of wireless survey, different types of wireless surveys and their part in planning good wireless network architecture.   Why survey? The most prominent issues faced in wireless network are slowness and disconnections which are indirectly the impacts of interference and signal overlap. A survey can help us identify all [...]

By | May 7th, 2020|BLOG, Uncategorized|0 Comments

Adding a Single Fortigate Device into Fortimanager

  There are three ways of adding a FortiGate device to Fortimanager. Through IP address, Serial number, and through central management. In the first method, we can add a FortiGate through its IP address. The second method of adding the FortiGate device is by its serial no. The third method should be performed initially in [...]

By | May 6th, 2020|BLOG, Fortigate|0 Comments

Creating Administrative Domains in Fortimanager

  Brief about ADOM   ADOMs (Administrative Domain) enables administrators to manage only those devices that they are specifically assigned. The use of ADOMs allows us to create a separate logical environment, in which we can maintain separate sets of devices. The device may be physical or virtual. Each administrative domain provides isolated management based [...]

By | May 6th, 2020|BLOG, Fortigate|0 Comments

Fortimanager Firmware Upgradation.

    https://www.youtube.com/watch?v=zTHcONzTuf4   The above video showcases the steps to upgrade the firmware of the Forti Manager. Admin can download the firmware from Fortinet support portal.

By | April 16th, 2020|BLOG, Fortigate|0 Comments